XFlasher 360 Rev C NAND & eMMC Programmer for Xbox 360

Main Store Version

Product Name

XFlasher 360 Rev C NAND & eMMC Programmer for Xbox 360

Description

XFlasher 360 Rev C

The XFlasher 360 Rev C is an all-in-one Xbox 360 NAND and eMMC programming tool designed to simplify reading, writing and programming work across compatible Xbox 360 motherboard revisions.

Compared with older tools such as the NAND-X and JR Programmer, the XFlasher 360 is designed to offer faster NAND access, integrated support for 4GB Corona eMMC storage and direct compatibility with J-Runner with Extras.

Rev C Improvements

The Rev C version includes:

• Integrated EEPROM
• Added FT reset button
• Improved all-in-one programming workflow
• Integrated support for 16MB NAND and 4GB eMMC access

Fast NAND & eMMC Access

The XFlasher 360 is designed to provide significantly faster read/write performance than many older Xbox 360 programming tools.

Typical advertised performance includes:

• 16MB NAND read/write in under approximately 50 seconds
• 4GB NAND/eMMC read/write in approximately 5 seconds

Actual speeds can vary depending on the motherboard, connection quality and software environment.

Built-In 4GB Corona Support

One of the biggest advantages of the XFlasher 360 is the integrated 4GB Corona eMMC interface.

There is no need to rely on a separate SD card reader or standalone 4GB NAND tool.

The flasher includes a mode switch allowing you to toggle between:

• SPI / 16MB NAND mode
• eMMC / 4GB mode

Glitch Chip Programming

The XFlasher 360 can also be used to program compatible Xilinx-based glitch chips, including selected:

• Ace V3
• CoolRunner
• Matrix
• Similar supported devices

Included Cables

The programmer is supplied with the main cables required for common Xbox 360 programming work:

• NAND programming cable
• Glitch chip programming cable
• 4GB eMMC / NAND connection cable

All three connect directly to the XFlasher 360.

J-Runner with Extras Support

The XFlasher 360 is designed for use with J-Runner with Extras.

This provides integrated support for NAND reading, writing, eMMC access and compatible programming operations.

Windows Driver Support

The XFlasher 360 uses native Windows x64 driver support, avoiding the older unsigned-driver setup commonly associated with some legacy programmers.

Key Features

• All-in-one Xbox 360 programming tool
• Supports 16MB NAND and 4GB eMMC
• Integrated SD/eMMC interface
• Fast NAND read/write performance
• Switchable SPI and eMMC modes
• Compatible with J-Runner with Extras
• Supports compatible Xilinx-based glitch chips
• Native Windows x64 driver support
• Integrated EEPROM
• FT reset button
• Supplied with programming cables

Compatibility

Designed for use with compatible Xbox 360 motherboard revisions, including supported PHAT and Slim boards.

Correct wiring and connection method varies by motherboard revision.

Installation & Use

This tool is intended for experienced Xbox 360 repair and modification work.

Use may require:

• Soldering
• Correct motherboard identification
• J-Runner with Extras
• Suitable drivers
• Careful connection of NAND or eMMC points

Incorrect wiring can damage the console, programmer or motherboard.

Package Contents

• 1 × XFlasher 360 Rev C
• 1 × NAND Programming Cable
• 1 × Glitch Chip Programming Cable
• 1 × 4GB eMMC / NAND Cable

Credits

With thanks to:

• Element / The Mod Shop for development of the XFlasher 360
• Octal450 / Octal's Console Shop for XFlasher 360 integration into J-Runner